■ 2 pole relay with force guided contacts according to EN61810-3 (formerly EN50205)
■ Reinforced insulation between poles
■ Version P1 for use in sockets

■ Low profile relay with force guided contacts according to EN 50205
■ 5 form A (NO) + 2 form B (NC) contacts
■ Reinforced insulation between contact circuits

■ 4 pole relay with force guided contacts according to EN EN61810-3 (formerly EN50205)
■ Compact design and space efficient

■ 4 pole relay with force guided contacts according to EN 50205n High insulation
■ distances between electrical circuits

■ 6 pole relay with force guided contacts according to EN50205
■ DIN rail mounting
■ AC / DC inpu

■ Compact package
■ Two and four pole form C contact arrangements
■ Polycarbonate or nylon dust cover
■ Various mounting configurationsn
■ Indicator lamp and push-to-reset options available
■ Various contact materials available for specific load requirements

■ Occupies very small panelspace
■ May be mounted singly, incontinuous rows or ingroups
■ Available with screwterminal molded socket
■ 4 SPDT contacts
■ File E15631, File LR29186

■ 2/3 pole 10A, 2 form C (CO) or 3 form C (CO) contacts
■ DC and AC coils
■ Mechanical indicator as standard
■ Electrical indicator
■ New test system with front operated finger protected push-to-test button and integral locking test tab
■ White write on panel

SNR
■高靈敏度線圈170mW
■用於DIN導軌插座的堅固線圈針腳
■ 4kV線圈-觸點，6/8mm電氣間隙/爬電距離
■強化絕緣
■系統寬度減少
RT
■高靈敏度線圈400mW
■無鎘觸點■強化絕緣
■ 4kV/8mm線圈-觸點
PT
■高靈敏度線圈400mW
■無鎘觸點■強化絕緣
■ 4kV/8mm線圈-觸點
■手動測試標籤
■機械與電氣指示器
PT
■高靈敏度線圈
■低高度29/33mm
■無鎘觸點■機械指示器
■手 動 測 試 標 簽，可 選 鎖 定
■可選LED，保 護二 級 管

■ 1 pole 6A, 1 form C (CO), 1 form A (NO)
■ Only 5mm widen
■ Flat pack version available
■ Sensitive coil 170mW
■ Reinforced insulation (protection classII)
■ Strong coil pins for DIN-rail socket
■ Allows high function- / packaging density
■ Cadmium-free contacts, AgNi 90/10 for AC-loads

■ DC and AC coil
■ Mono-or bistable coil
■ Reinforced insulation
■ WG type available (IEC 60335-1)
■ High ambient temperature version (105°C)
■ THR (reflow) version
■ Sensitive version
■ Bifurcated contacts

■ 1 pole 16 A, 2 pole 8 A, 1 form C (1 CO) contact or 2 form C (2 CO) contacts
■ DC or AC coil, sensitive coil 400 mW
■ Reinforced insulation, protection class II (VDE 0700)
■ 4kV/8mm dielectric strength between coil and contact
■ Manual test tab, optionally lockable
■ Version with mechanical and/or electrical indicator optional
■ Suitable for use in Tyco Electronics’ standard RT sockets
■ Recycleable packaging

■ Dual coil latching relay accepts a momentary impulse to one coil to latch and a second impulse to the other coil to release
■ Clear polycarbonate dust cover with 11- or 20-pin plug
■ 11- or 20-pin octal-style plug connector
■ AC and DC coils
■ Two, four, and five pole Form C (CO) contact arrangement

■ 5 to 10A current capability
■ Contact arrangements of 1, 2 and 3 form C (CO)
■ Octal type termination for quick installation
■ Indicator lamp available on certain models

■ 1 Form X, 2 Form A and 2 Form C contact arrangements
■ 10 amp current rating
■ Magnetic blow-out
■ Various mounting options
■ Indicator lamp available

■ Magnetic latching relay
■ Single or dual wound DC coils or single wound AC coils
■ 1, 2, and 3 pole Form C contact arrangement n Reset occurs by reversing polarity in a single coil relay or by energizing the reset winding in dual coil relays
■ Various mounting and socket styles

■ AC coils: 5-240VAC, 50/60 Hz.; DC coils 6-110VDC
■ Contact arrangements of 1 form X, 1-3 form A and 1-4 form C
■ Wide selection of termination and mounting styles
■ PC terminals available
■ Push-to-test button and indicator lamp options
■ Sockets available for panel, DIN rail or PCB mounting
■ Class B coil insulation

■ AC coils 24, 120 & 240V 50/60 Hz.; DC 12 & 24VDC.
■ Contact arrangement to 3PDT
■ Sockets available for all models.
■ Accepted pin pattern for HVAC industry.
■ Primarily designed for the HVAC industry.

■ 2/3 pole 10/16A, 2 form C (CO) or 3 form C (CO) contacts
■ Switching capacity up to 6000VA
■ DC or AC coil
■ Mechanical indicator
■ Push-to-test button
■ Plug-in version, PCB terminals, chassis- or DIN-rail mount

■ 2 pole 12A, 3 pole 10A or 4 pole 6A, 2, 3 or 4 form C (CO) contacts
■ DC or AC coil
■ Switching performance up to 3000VA
■ Relay height 29mmn Mechanical indicator, optional LED and protection diode
■ Manual test tab, optionally lockable
■ White marking tabs

■ 2 Form C contact arrangement
■ AC and DC coils
■ Socket, PCB and top flange mounting options

■ 15 amp rating
■ Contact arrangements 1-3 form A, 1-3 form B, 1-3 form C, 1 form X, 1 form Y, 1 form Z
■ Open or enclosed
■ Plain or bracket mount dust covers
■ Optional indicator lamp and push-to-test button
■ Several termination and mounting style

■ AC coils 6 to 277VAC 50/60Hz, DC 6 to 110VCD
■ Contact arrangement up to 2 form C (CO)
■ .250” combination push-on/solder terminals or PC terminals
■ Side flange and top flange mounting
■ Designed to meet VDE space requirements: Class B coil insulation

■ 5 to 10A rating
■ 1 form A (NO) and 1 form C (CO) contact arrangements
■ Sensitive coil available for 1 form A typ

■ 1 pole, 1 Form A (NO) contact
■ 3 to 10A rating
■ Small size
■ 4000Vrms coil to contact dielectric strength (OJ type)
■ Sensitive coil optional

■ 2 pole, 3A(DM3)/5A(DM5), 2 form A (NO)
■ UL TV-3 rating (DM5) available
■ Meet 3000V dielectric voltage between coil and contacts
■ Meet 5000V surge voltage between coil and contact

■ 1 pole 3 A, 1 form A (NO) contact
■ Only 5mm widen 3A switching current, load range 1mA up to 5A
■ Sensitive coil 120mWn Allows high function-/packing density
■ Cadmium-free contacts
■ Z type with reinforced insulation
■ RoHS compliant (Directive 2002/95/EC)

■ 1pole 3A/5A, 1 form A (NO) contact
■ Sensitive coil 200mWnAmbient temperature 85°C or 105°C
■ RoHS compliant (Directive 2002/95/EC)
■ WG version : Product in accordance to IEC60335-1

■ UL TV-8 rating (HM type) and UL TV-5 rating (LM/DM type)
■ 10A rating (HM type) and 5A rating (LM/DM type)
■ Small size (18.2 x 10.2 x 15.2H)
■ 4000Vrms coil to contact dielectric strength
■ Sensitive coil optional (LM type)

■ 1 pole 5 A, 1 form A (NO) contact
■ Low height 12.0mm
■ Especially suited for applications white goods, consumer electronics, etc.
■ Plastic materials according to IEC 60335-1 (domestic appliances

■ Polarized bistable version
■ 1 pole 5 A, 1 form C (CO) or 6A, 1 form A (NO) contact
■ Sensitive version with 200mW coil
■ Ambient temperature 70°C
■ Low height 10.0mm
■ Plastic materials according to IEC 60335-1 (domestic appliances

■ 10A contact rating
■ UL TV-5 and TV-8 rating
■ 1 form A (NO) contact arrangement
■ Sensitive and standard coils available

■ 1pole 6 A, 1 form C (CO) or 1 form A (NO) contact
■ Environmentally-friendly cadmium-free contacts
■ Class F coil system standard
■ For ambient temperatures up to 105°C
■ Product in accordance to IEC 60335-

■ 1 pole 6 A, 1 form A (NO) contact
■ Sensitive coil 200 mWn 4 kV coil-contact
■ Optimized height 10.6mm
■ PCB area 200mm2
■ Wash tight
■ Product in accordance to IEC 60335-1 (domestic appliances)

■ 1 pole 6A, 1 form C (CO), 1 form A (NO)
■ Only 5mm widen Flat pack version available
■ Sensitive coil 170mWn Reinforced insulation (protection classII)
■ Strong coil pins for DIN-rail socket
■ Allows high function- / packaging density
■ Cadmium-free contacts, AgNi 90/10 for AC-load

■ 1 pole 7A, mono or bistable
■ 1 form C (CO) or 1 form A (NO) or 1 form B (NC contact)
■ Bistable and DC version
■ Wash tight version
■ Version for 10A on request

■ 1 pole 8A, 1 form C (CO) or 1 form A (NO) contact
■ 4kV/8mm coil-contact
■ Reinforced insulation (protection classII)
■ Ambient temperature up to 85°C at 8A
■ Plastic materials according to IEC60335-1 (domestic appliances)

■ 1 pole 8A, 1 form C (CO) or 1 form A (NO) or 1 form B (NC) contact
■ Low component height 12.3mm
■ 5kV/8mm coil-contact
■ Reinforced insulation (protection class II)
■ Pinnings: 3.2mm and 5mm
■ Reflow-solderable version
■ Especially suitable for resistive and inductive loads on form A (NO) and form B (NC) contacts
■ Plastic materials according to IEC 60335-1 (domestic appliances)

■ 2 pole 8A, 2 form C (CO) or 2 form A (NO) contacts
■ DC or AC coiln 5kV/10mm coil-contact, reinforced insulation
■ Ambient temperature up to 85°C
■ WG version: product in accordance to IEC60335-1
■ Reflow version: for THR (Through-Hole Reflow) soldering proce

■ 1pole 10/16A, 1 form A (NO) or 1 form C (CO) contact
■ Meet 5000V dielectric voltage between coil and contacts
■ Meet 10000V surge voltage between coil and contacts
■ Can provide anti-explosion type (meet IEC-60079-15/GB3836.1-2010/GB3836.8-2014)

■ 1 pole 12/16A, 1 form C (CO) contact
■ Sensitive DC coil, 200 or 400mW
■ 5kV/10mm coil-contact, reinforced insulation
■ Ambient temperature 85°C

■ 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact
■ DC or AC coil
■ 5kV/10mm coil-contact, reinforced insulation
■ Ambient temperature 85°C (DC coil)
■ WG version: product in accordance to IEC 60335-1
■ Reflow version: for THR (Through-Hole Reflow) soldering process

■ 1 pole 12/16 A, 1 form C (CO) or 1 form A (NO) contact
■ DC coil 400 mW
■ 5kV/10mm coil-contact, reinforced insulation
■ Ambient temperature 85°C
■ Product in accordance to IEC 60335-1
■ Reflow version for THR mounting process

■ 1 pole 16A, 1 form A (NO) or 1 form B (NC) contact
■ Switching capacity 4000VA
■ Coil power 360mW
■ 4kV/8mm coil-contact, insulatio
■ to VDE 0631 and 0700
■ Ambient temperature up to 125°C
■ Quick connect terminals for load side
■ WG version: Materials in accordance to IEC 60335

■ 1 pole 16A, 1 form X, double make, bridging contact
■ Contact gap >3mmn Switching capacity 4000VA
■ Coil power 360mW
■ 4kV/8mm coil-contact, insulation to VDE 0631 and 0700
■ Ambient temperature 85°C; max. 105° at 10A
■ Quick connect terminals for load side
■ Materials in accordance to IEC 60335-

■ 1pole, 16A, 1 form A(NO) or 1 form C (CO)
■ UL TV-8 (OZT) available
■ Meet 5000V dielectric voltage between coil and contacts
■ Meet 10000V surge voltage between coil and contacts

■ 1 pole 16A, 1 form A (NO) or 1 form B (NC) contact
■ Coil power 400mW
■ Reinforced insulation (EN 61810, 60335, 60730)
■ Ambient temperature up to 105°C
■ Quick connect terminals for load side
■ WG version: Materials in accordance to IEC 60335-1

■ 1 pole 16A, 1 form C (CO) or 1 form A (NO) contact
■ For inrush peak currents up to 80A
■ Mono- or bistable coil
■ 5kV/10mm coil-contact
■ Reinforced insulationn Ambient temperature 85°C
■ WG version: product in accordance to IEC 60335-1

■ 1 pole 16A, 1 form A (NO) contact (W pre-make contact + AgSnO2)
■ 16A rated fluorescent load
■ 140μF load, 16A/250V, 30000 operations
■ Bistable coil
■ 5kV/10mm coil-contact
■ Reinforced insulation

■ Meet UL508 and TUV requirementsn 1 form A contact arrangement
■ Quick connect terminal type and PC board type
■ Meet 5000V dielectric voltage between coil and contacts
■ Meet 10000V surge voltage between coil and contacts (1.2/50μ

Key Benefits
• Compact size for PCB applications
• Meets IEC 62109-2 requirement for > 1.8 mm contact gap
• Energy efficient holding power of 200 mW
Applications
• Photovoltaic inverters
• Charging stations
• Electrical grid disconnects

■ 40A, 2 form A (NO) and 2 form C (CO) switching capability
■ Designed to control compressor loads to 3.5 tons, 110LRA / 25.3FLA
■ Meets requirements of UL 508 and UL 873 spacings - 8mm through air, 9.5mm over surface
■ Meets requirements of VDE 8mm spacing, 4kV dielectric coil-to-contact
■ Meets requirements of UL Class F construction
■ UL approved for 600VAC switching (1.5HP)
■ Screw terminal version (consult factory for availability, ratings)
■ Anti-explosive version available (Meets EN 60079-15)
■ WG version available (Meets EN 60335-1

■ 1 pole 30A, 1 formA(NO) or 1 formC(CO)
■ High breaking capacity 7500 VA
■ PCB and PCB/quick connect terminals
■ UL class F insulation as standard
■ Ambient temperature up to 105°C
■ Plastic materials according to IEC60335-1

■ 30A, 1 form A (NO); 20A, 1 form C (CO)
■ Available as open frame or sealed construction
■ Meets UL 508 and 873 Spacing - 3.18 through air, 6.36 over surface
■ UL class F insulation system standard

■ Designed to be thesmallest, lowest costcontactor in the industrywith its current rating
■ Built-in coil economizer –only 1.7W hold power @12VDC and limits back EMFto zero volts
■ Hermetically sealed –intrinsically safe, operatesin explosive & harshenvironments with nooxidation or contaminationof coils or contacts,including long periods ofnon-operation.

■ 1 pole 35A, 1 form A (NO) contact
■ Contact gap >1.5/1.8/2.1 mm options availablen350mW hold power1)
■ Ambient temperature up to 85°C at 35A
■ Meet VDE 0126-1-1 and IEC 62109-2
■ Product in accordance to IEC 60335-1
■ EN61095: AC7a at 85°

■ 1 pole 60A, 1 form A (NO) contact
■ Polarized bistable (latching) with 1 or 2 coils
■ NEMA 410-2011, 16A, 277VAC, electronic ballast; 20A branch circuit
■ 480A inrush, 2.1m sec

■ Multi-pole configurations
■ Normally open, normally closed and mixed contact arrangements
■ Optional quick connect tabs for sensing
■ Small, lightweight & cost-effective – designed to be the smallest, lowest cost contactor in the industry with its current rating
■ Standard models available with 12VDC, 24VDC and 115VAC coils. Consult factory for240VAC coil models.
■ 1 Form A auxiliary contacts

• Industry standard package and pin-out.
• Color coded by function.
• 4000V rms optical isolation.
• High immunity to false operation
• Series compatible.
• Compatible with 2IO series mounting boards.

• Industry standard package and pin-out.
• Color coded by function.
• 4000V rms optical isolation.
• High immunity to false operation
• Series compatible.
• Compatible with 2IO series mounting boards.

• Industry standard package and pin-out.
• Color coded by function.
• 4000V rms optical isolation.
• High immunity to false operation
• Series compatible.
• Compatible with 2IO series mounting boards.

• Slim line .4” (10.16mm) thick package.
• Foot print same as .6” (15.24mm) thick package.
• 4000V rms optical isolation.• Color coded by function.
• High immunity to false operation.• Series compatible.
• Compatible with 2IOM series mounting boards

• Industry standard package and pin-out.
• Color coded by function.
• 4000V rms optical isolation.
• High immunity to false operation
• Series compatible.
• Compatible with 2IO series mounting boards.

• Industry standard package and pin-out.
• Color coded by function.
• 4000V rms optical isolation.
• High immunity to false operation
• Series compatible.
• Compatible with 2IO series mounting boards.

• Slim line .4” (10.16mm) thick package.
• Foot print same as .6” (15.24mm) thick package.
• 4000V rms optical isolation.• Color coded by function.
• High immunity to false operation.
• Series compatible.
• Compatible with 2IOM series mounting boards.

• Slim line .4” (10.16mm) thick package.
• Foot print same as .6” (15.24mm) thick package.
• 4000V rms optical isolation.
• Color coded by function.
• High immunity to false operation.
• Series compatible.
• Compatible with 2IOM series mounting boards.

• Standard “hockey puck” package.
• LED indicator.
• Inverse parallel SCR output.
• 25, 50 & 125A rms versions.
• 240VAC & 480VAC output types.
• Zero voltage and random voltage turn-on versions.
• AC & DC input versions.
• 4000V rms optical isolation.
• Floating terminal design.
• Cover design with anti-rotation barriers.